咨询电话:

180 5872 7900

杭州速能机械有限公司
产品详情
中心孔机床SJD120系列

中心孔机床SJD120系列

中心孔机床SJD120
0.00
0.00
  
中心孔机床SJD120

技术数据


加工规格范围
L=500--10000mm
D=φ50--φ500mm
 
加工功能描述
标配功能 铣端面、钻中心孔
选配功能  
1.铣端面、钻孔攻丝、套车外圆、倒角等
2.铣端面、镗孔、铰孔等
3.铣端面、钻中心孔、套车外圆、倒角等
 
结构特性
所有设计及配置都有预留自动化接口
All designs and configurations are provided with the reserved automation interface
采用伺服主轴电机,保证切屑性能及更佳节能
大跨度超强刚性矩形导轨;导轨总宽度650mm,轨宽度120mm
双分离式整体自定义夹具,刚性更强
敞开式内外全防护自动门,使上下料更为方便、安全
主轴系统按国际强刚标准,刚性更好,切削更强,并有多种功能的主轴可选配
整体不锈钢防护罩
HT250高刚性整体床身通过力学研究设计,保证强切屑时无振动现象
十字滑台结构,总宽度700mm轨宽度90mm,加工大型产品时机床给进稳定
上料高度1200mm,按人体构,造学设计操作更加便捷、轻松
自动排屑,可根据客户要求,分左、右、后三方排屑设计



 
 
夹持精确稳定、大小调整操作简单的分离式双V液压自定义夹具
Separantion type dual-Vhydraulic self-centering fixture with precise and stable clamping and simple operation in adjustment
 
高刚性的主轴及动力设计,满足大型铣削刀盘的强力切削需求
High-rigidity spindle and cutter disc's strong cutting demands
 
整体铸造平床身,宽体式精密导轨支承结构,满足大重型工件的切削承载
Integrated casting flat bed,broad precise guideway support structure,which meet large and heavy work piece's cutting demands
 
导轨滑动接触面都经人工精心产刮、并布局合理的润滑油槽
Guideway slide contact face experiences the precise manual scraping,in addition to lubricating oil groove with reasonable layout
 
强刚性铣钻攻三主轴结构,标准化的刀柄接口
Strong-rigidity milling/drilling/tapping three-spindle structure,standardized shank
大型强钢性铣打双轴组合动力头
1.铣刀中心可放中心钻
2.铣和钻可以分开
3.铣钻一体,另一主轴可以钻孔,也可以镗孔
1.A center srill can be placed at the center of milling cutter.2.The milling cutter and drill can be separated.3.The milling cutter and drill are integrated,and the other shaft can be used to drill 
and bore holes.
  典型加工样件  
 
  技术参数